Concrete Base Installation
Hot Tub and Swim Spa Bases
Strong, level, reinforced slabs to carry the heavy load of a filled hot tub or swim spa, with power ducting and drainage considered.

What's involved
A filled hot tub with bathers can weigh well over a tonne per square metre, and swim spas far more, so the base must be strong and dead level to protect the shell and warranty. The groundworker digs out, compacts a deeper hardcore layer and pours a reinforced slab, typically 100mm to 150mm thick, extending a little beyond the tub's footprint. Ducting for the armoured supply cable is laid to the control panel position, with the final connection made by a qualified electrician. Where the tub will be emptied regularly, a nearby drain or soakaway is planned. Around the slab, a step, decking or paving can be added. Recessed or partly sunk tubs need extra excavation and drainage. Allow at least a week of curing before filling, longer in cold weather.
How we handle it
Tell us what the base is for
Use the quote form to give the size, the building or item it will carry and the current ground surface. Include the supplier's base specification if you have it, and photos of access from the road.
Site visit and setting out
A local groundworker checks levels, ground conditions, access for barrows or a concrete lorry, and positions for ducts. They confirm slab thickness, reinforcement and sub-base depth for your use.
Fixed quote
You receive one price covering excavation, waste removal, hardcore, formwork, membrane, mesh, concrete and finishing. The quote states the slab thickness and size so you can compare like for like.
Dig, form and pour
Turf and soil are removed, hardcore compacted, formwork and membrane fixed, ducts placed and concrete poured and finished. Most domestic bases are prepared and poured in one or two days.
Curing and handover
The slab is covered to cure, protecting it from frost, rain or hot sun. The groundworker removes formwork and tells you when it is ready for your building, hot tub or garage.
Price guide
Concrete bases are priced mainly by area and thickness, with adjustments for access, excavation and reinforcement. Small bases carry a minimum charge because the labour, kit and delivery are similar whatever the size. Mixing by hand or using a mini mixer suits small pads, while larger slabs use ready-mix. The figures here reflect what UK homeowners typically pay for base work in 2026.
- Single garage base: £1,800–£3,200. Thicker reinforced slab, typically around 6m by 3m, set out square for a sectional garage.
- Hot tub base: £600–£1,200. Reinforced level slab for a standard hot tub of around 2.2m square, with power duct.
- Garden room base: £70–£110 per m². Reinforced 100–150mm slab with membrane, blinding and ducts cast in to the supplier's layout.
Questions about hot tub and swim spa bases
Can concrete bases be laid in winter?
Yes, with care. Concrete should not be poured onto frozen ground or when hard frost is expected before it sets. Groundworkers cover new slabs with insulating sheets or hessian in cold weather and may delay a pour if the forecast is very cold.
Other services
Shed and Summerhouse Bases
Level concrete slabs sized to your shed or summerhouse, on a compacted hardcore sub-base, ready for the building to go straight on.
Garden Room and Office Bases
Reinforced slabs built to the garden room supplier's specification, with ducts for power, data and water cast in before the pour.
Garage and Workshop Slabs
Thicker reinforced concrete slabs, often with thickened edges, for concrete sectional garages, timber workshops and steel buildings.
Concrete Pads and Hardstandings
Pads for bins, air source heat pumps, oil tanks, log stores, greenhouses and parking, built to suit the load and use.
Base Removal and Replacement
Breaking out cracked, sunken or undersized bases, removing the waste and pouring a new slab ready for your replacement building.
Hot Tub and Swim Spa Bases near you
Get a free concrete base installation quote
Tell us what you need and we'll come back with a clear price.
Request a quote