Concrete Base Installation
Concrete Pads and Hardstandings
Pads for bins, air source heat pumps, oil tanks, log stores, greenhouses and parking, built to suit the load and use.

What's involved
Smaller concrete pads are needed all over a property: for wheelie bins, oil tanks, heat pumps, log stores, greenhouses and caravan or trailer standings. Each needs a slightly different specification. Heat pump pads must suit the manufacturer's clearances and are often isolated from the house wall to cut vibration. Oil tank bases must extend beyond the tank footprint by the amount set out in the relevant guidance, and be non-combustible and level. Parking hardstandings need thicker concrete, reinforcement and a fall for drainage, and in front gardens drainage rules apply. The groundworker prepares a compacted sub-base, forms the pad and pours and finishes the concrete, often doing several small pads in one visit. Most small pads are completed in half a day to a day.
How we handle it
Tell us what the base is for
Use the quote form to give the size, the building or item it will carry and the current ground surface. Include the supplier's base specification if you have it, and photos of access from the road.
Site visit and setting out
A local groundworker checks levels, ground conditions, access for barrows or a concrete lorry, and positions for ducts. They confirm slab thickness, reinforcement and sub-base depth for your use.
Fixed quote
You receive one price covering excavation, waste removal, hardcore, formwork, membrane, mesh, concrete and finishing. The quote states the slab thickness and size so you can compare like for like.
Dig, form and pour
Turf and soil are removed, hardcore compacted, formwork and membrane fixed, ducts placed and concrete poured and finished. Most domestic bases are prepared and poured in one or two days.
Curing and handover
The slab is covered to cure, protecting it from frost, rain or hot sun. The groundworker removes formwork and tells you when it is ready for your building, hot tub or garage.
Price guide
Concrete bases are priced mainly by area and thickness, with adjustments for access, excavation and reinforcement. Small bases carry a minimum charge because the labour, kit and delivery are similar whatever the size. Mixing by hand or using a mini mixer suits small pads, while larger slabs use ready-mix. The figures here reflect what UK homeowners typically pay for base work in 2026.
- Hot tub base: £600–£1,200. Reinforced level slab for a standard hot tub of around 2.2m square, with power duct.
- Single garage base: £1,800–£3,200. Thicker reinforced slab, typically around 6m by 3m, set out square for a sectional garage.
- Small pad for bins, tank or heat pump: from £250. Simple pads under about 2m², with several pads in one visit usually cheaper each.
Questions about concrete pads and hardstandings
How much does a concrete shed base cost?
A concrete base for a typical shed up to about 3m by 2.4m usually costs £450 to £850 fitted, including excavation, hardcore, membrane and concrete. Larger bases for garden rooms cost around £70 to £110 per square metre. Difficult access or sloping ground adds to the price.
How thick should a concrete base be?
Around 100mm of concrete on 75mm to 100mm of compacted hardcore suits most sheds. Garden rooms and hot tubs usually need 100mm to 150mm with steel mesh. Garages and heavy loads typically need 150mm or more, reinforced. Always check your supplier's specification.
How long does a concrete base take to cure?
Concrete is usually firm enough to walk on within a day. Most sheds can be built on it after three to seven days. Heavier buildings and hot tubs should wait at least a week. Concrete continues to gain strength for around 28 days, and curing slows in cold weather.
Other services
Shed and Summerhouse Bases
Level concrete slabs sized to your shed or summerhouse, on a compacted hardcore sub-base, ready for the building to go straight on.
Garden Room and Office Bases
Reinforced slabs built to the garden room supplier's specification, with ducts for power, data and water cast in before the pour.
Hot Tub and Swim Spa Bases
Strong, level, reinforced slabs to carry the heavy load of a filled hot tub or swim spa, with power ducting and drainage considered.
Garage and Workshop Slabs
Thicker reinforced concrete slabs, often with thickened edges, for concrete sectional garages, timber workshops and steel buildings.
Base Removal and Replacement
Breaking out cracked, sunken or undersized bases, removing the waste and pouring a new slab ready for your replacement building.
Concrete Pads and Hardstandings near you
Get a free concrete base installation quote
Tell us what you need and we'll come back with a clear price.
Request a quote