Concrete Base Installation
Garage and Workshop Slabs
Thicker reinforced concrete slabs, often with thickened edges, for concrete sectional garages, timber workshops and steel buildings.

What's involved
Garages and workshops carry vehicles, heavy machinery and the weight of the building itself, so slabs are thicker and better reinforced. A typical sectional garage base is around 150mm thick, reinforced with mesh and often with thickened edges where the walls sit, or a separate strip foundation as specified by the garage maker. The groundworker sets out precisely, as sectional garages rely on the slab being square to within a few millimetres. A slight fall towards the doors helps water drain out. For workshops, ducts for power and data are cast in, and holding-down bolts can be positioned in the wet concrete. Large slabs are poured with ready-mix delivered by lorry or pumped where access is tight. A single garage base usually takes two days to dig, form and pour.
How we handle it
Tell us what the base is for
Use the quote form to give the size, the building or item it will carry and the current ground surface. Include the supplier's base specification if you have it, and photos of access from the road.
Site visit and setting out
A local groundworker checks levels, ground conditions, access for barrows or a concrete lorry, and positions for ducts. They confirm slab thickness, reinforcement and sub-base depth for your use.
Fixed quote
You receive one price covering excavation, waste removal, hardcore, formwork, membrane, mesh, concrete and finishing. The quote states the slab thickness and size so you can compare like for like.
Dig, form and pour
Turf and soil are removed, hardcore compacted, formwork and membrane fixed, ducts placed and concrete poured and finished. Most domestic bases are prepared and poured in one or two days.
Curing and handover
The slab is covered to cure, protecting it from frost, rain or hot sun. The groundworker removes formwork and tells you when it is ready for your building, hot tub or garage.
Price guide
Concrete bases are priced mainly by area and thickness, with adjustments for access, excavation and reinforcement. Small bases carry a minimum charge because the labour, kit and delivery are similar whatever the size. Mixing by hand or using a mini mixer suits small pads, while larger slabs use ready-mix. The figures here reflect what UK homeowners typically pay for base work in 2026.
- Garden room base: £70–£110 per m². Reinforced 100–150mm slab with membrane, blinding and ducts cast in to the supplier's layout.
- Shed base up to 3m by 2.4m: £450–£850. Around 100mm of concrete on compacted hardcore with membrane, including excavation and spoil removal.
- Break out and remove old base: from £300. Breaking up and taking away an existing shed-sized slab, before a new one is poured.
Questions about garage and workshop slabs
Do I need planning permission for a concrete base?
A base alone rarely needs planning permission in a back garden. The building that sits on it may need permission depending on its size, height and position. Large hard surfaces in front gardens in England must drain naturally or need permission.
How much does a concrete shed base cost?
A concrete base for a typical shed up to about 3m by 2.4m usually costs £450 to £850 fitted, including excavation, hardcore, membrane and concrete. Larger bases for garden rooms cost around £70 to £110 per square metre. Difficult access or sloping ground adds to the price.
Does a concrete base need steel reinforcement?
Light shed bases often do not. Garden rooms, hot tubs, garages and bases on poor or variable ground usually benefit from steel mesh, which controls cracking and spreads the load. Your groundworker will recommend mesh based on what the base supports.
Other services
Shed and Summerhouse Bases
Level concrete slabs sized to your shed or summerhouse, on a compacted hardcore sub-base, ready for the building to go straight on.
Garden Room and Office Bases
Reinforced slabs built to the garden room supplier's specification, with ducts for power, data and water cast in before the pour.
Hot Tub and Swim Spa Bases
Strong, level, reinforced slabs to carry the heavy load of a filled hot tub or swim spa, with power ducting and drainage considered.
Concrete Pads and Hardstandings
Pads for bins, air source heat pumps, oil tanks, log stores, greenhouses and parking, built to suit the load and use.
Base Removal and Replacement
Breaking out cracked, sunken or undersized bases, removing the waste and pouring a new slab ready for your replacement building.
Garage and Workshop Slabs near you
Get a free concrete base installation quote
Tell us what you need and we'll come back with a clear price.
Request a quote