Concrete Base Installation glossary
The terms you'll come across, explained in plain English.
- Blinding
- A thin layer of sand spread over hardcore to fill gaps and give a smooth surface, protecting the membrane from being punctured.
- BS 8500
- The British Standard commonly used to specify concrete in the UK, setting out strength classes and mixes for different uses and exposure conditions.
- Concrete base
- A flat slab of concrete laid on a prepared sub-base to support a shed, garden room, hot tub, garage or other outbuilding.
- Curing
- The period after pouring when concrete hardens through a chemical reaction with water. Keeping it damp and frost-free helps it reach full strength.
- Damp-proof membrane
- A sheet of heavy polythene laid under a slab to stop ground moisture rising through the concrete and to hold water in the fresh mix.
- Duct
- A plastic pipe cast into or under a slab to carry electric, water or data cables into a building without exposing them.
- Formation level
- The firm natural ground left after topsoil and soft material have been dug out, on which the sub-base is laid.
- Formwork
- Temporary timber boards fixed around the edge of a base to hold the wet concrete in shape and set the finished level.
- Hardcore
- A general term for crushed stone, broken brick or concrete used as a sub-base. Quality hardcore is clean and compacts well.
- Mesh chairs
- Small plastic spacers that hold steel mesh at the correct height so it ends up inside the concrete rather than at the bottom.
- MOT Type 1
- A widely used graded crushed stone for sub-bases, containing a mix of sizes down to dust so it compacts into a firm, stable layer.
- Ready-mix concrete
- Concrete batched at a plant to a set mix and delivered by lorry, giving consistent strength for larger slabs poured in one go.
- Steel mesh
- A welded grid of steel bars placed within a slab to control cracking and spread loads. Common grades include A142 and A193.
- Sub-base
- The layer of compacted crushed stone beneath a concrete slab. It spreads the load, gives a firm platform and helps drainage.
- Tamped finish
- A textured concrete surface made by tapping a board across it. It gives grip and is commonly used for bases hidden under buildings.
- Thickened edge
- A deeper strip of concrete around the perimeter of a slab, used under heavy walls such as concrete sectional garage panels.
Get a free concrete base installation quote
Tell us what you need and we'll come back with a clear price.
Request a quote